TrueX 860 Portable Spectrometer Price Handheld Gold XRF Analyzer for Metal Analysis
Product Feature
1. Small, light and easy to carry.
2. High-speed processing chip, advanced algorithm and high-responsive software, resulting in even faster analysis.
3. High-performance X-ray Tube, Ultra-high Resolution Detector combined with Digital Multi-channel Processing Technology, yielding super-high detection resolution.
4. Indicator lights flash on both sides for safety purposes during measurement, i.e., the built-in double beam technology will automatically sense whether there is a sample at the measurement window.
5. Industrial resistive touch screen, superior to capacitor screen in back-light and clearer against sunlight in the field. At the same time, people don't need to take off gloves when they are opreating machine in some particular environment.
6. TrueX utilizes anti-slip, abrasion resistance and streamlined design, which is light and easy to carry. It also integrates the new high speed digital multi-channel technology, the new library grade base identification system and the super-FP algorithm. These features allow it to measure elements faster, with higher accuracy and greater repeatability.
7. Intelligent battery management exerts a real-time monitoring of the residual capacity of battery and backup battery through MSBUS bus.
8. Automatic switch to standby mode when not used and recovery after the machine is picked up, which saves power and extends working time; moreover, TrueX has a gravity sensing system which shuts down instrument automatically when it accidentally falls down, another safety consideration; TrueX will also give out alarm when ambient temperature or humidity exceeds the scope of application.
9. TrueX adjusts air pressure factor automatically based on altitude it has detected. This function increases excitation effect of light elements by 40% and that of rare earth elements by 30%.
10. TrueX is supportive to battery hot plug, hence battery can be replaced without powering off the machine.
11. On TrueX, users can customize the reports by adding their company logos, addresses, test results, spectrum and others (such as product description, origin of products and batch number).
12. TrueX is built with double beam technology which can automatically sense whether there is a sample at the measurement window. This is also a safety and protection feature. The brightness of the display of TrueX is automatically regulated according to environment brightness.
13. TrueX can be configured and maintained in a remote way via Internet.
14. TrueX can build a three dimensional element content distribution graph allowing for a fast estimate of mineral reserves or the extent of geological disaster with the built-in GPS for latitude and longitude reading combined with a 3rd party GIS analysis software.
15. TrueX's new algorithm optimizes the spectral resolution, so lower detection limits can be achieved, which are comparable with even large-scale lab instruments.
16. TrueX Ultra-short optical™ path design can significantly improve light element excitation effects, without the fall/fill condition.
17. TrueX has a built-in environmental sensing system covering conditions such as temperature, dust humidity and others.
Technical Specification
| TrueX 860 elements analyzed |
| |
Scope of elements in standard test mode can be extended if there is such a need. |
| TrueX 860 |
can analyze Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Rh, Pd, Ag, Cd, Sn, Sb, Hf, Ta,W, Re, Pb, and Bi,totaling 30 elements. |
The ARM architecture Cortex-A8 1 GHZ
System Processor: The Android 4.2 operating system/80MHZ ADC digital pulse processor/4096 MCA channel , 32GB memory
Display: Industrial resistive touch screen with screen size of 4.3"
Data storage: Built-in 32gb memory, 300,000 spectral data and spectrum can be stored
Operating Temperature: -20ºC~+50ºC
Operating Humidity: ≤90%Limit of
Library of extensible and customizable alloys
Ability to make measurements on pipes, flat surfaces, surface integrals and welds
Method of analysis: the x-ray energy dispersive method for analysis of fluorescence
Simultaneously detect elements: simultaneously detect dozens of elements
Processor and RAM:
CPU: 1GB
RAM: 1GB
The standard configuration: 32G
Range content: ppm ~ 99.99%
15 seconds reading time
GPS, WIFI: integrated into the system
Battery: lithium battery, which can be loaded with a maximum capacity of our 6800Ah can operate continuously for 8 hours; Equipped with high voltage (110V-220V) adapter, can work under current alternative
Sensor resolution: solid, liquid, powder
Sensor resolution: low resolution can be 139eV
Excitation source: 40KV / 100mA-Ag window miniature tube anode X of light and high voltage source
Collimator and filter: sights of 4.0 or 2.0 of diameter, automatic switch of 8 filter. 12 kinds of groups, plus mode consisting of world, can satisfy different types of tests of samples
Display: touchscreen TFT - LCD, resolution of 640 * 480.
Protection against water, dust and shock
Test window: 12mm.
Charging system gas: Helium charging system of ordinary pressure.
Security: standalone password manager mode.
Detailed Photos
Company Profile
Why choose us
Our Service
FAQ
){kind=link}