Product Description
DW-RE-2000 Rotary Evaporator (2L)
Characteristics
1) DW-RE-2000 water bath rotary evaporator has beautiful design, its structure is reasonable and compact, simple and easy operation, precise temperature control and reliable performance.Besides, strong and durable are also its important advantages.
2) DW-RE-2000 rotary evaporator has two kinds condenser:A type ball milling port condenser and B type standard milling port screw thread condenser. Customer could choose condenser based on actual needs. Temperature range RT-90ºC, when temperature is higher than set temp. Value, heating tube automatic stop heating. This type water bath volume is small, so temperature rising is rapid.
- One time forming 4.5L heating bath use teflon composite material, easy cleaning. Design equiped with vacuum meter and valve, so as to avoid liquid in vacuum pump return flow into evaporation flask, help your research success at one time.
Technical Parameters:
Model |
DW-RE-2000A |
Host |
Rocker plate type buttons , automatic lifting 0-150mm |
Vacuum degree |
< 399.9Pa(3mmHg) |
Vacuum display meter |
When vacuum degree reach lowest, close valve and keep display rotary evaporator vacuum degree, reduce laboratory noise, prolong vacuum pump service life. |
Evaporation capacity |
Max.25ml/min |
Rotation speed |
Digital display / rotary knob speed adjustment 0-200 rpm/min;Power 40W |
Heating bath |
One time forming teflon composite heating bath φ23×13cm, whole closed heating device, Power 1.5KW |
Temperature |
Automatic control temperature, digital display, water bath, RT-90ºC±1ºC |
Condenser |
Vertical type, ball milling port condenser, cooling area 0.27 square meter. |
Material charging |
Valve type material charging tube, connect with PTFE tube and retaining water circle. |
Sealing ring |
Fluororubber + PTEF vacuum seal washer. |
Capacity range |
0.25--2L |
Power |
1.5kw Input voltage~220v/50Hz |
Volume / Weight |
71×46.5×51cm 30kg |
Standard configuration |
S35 ball milling port collecting flask 1L * 1pcs; 24# standard port evaporation flask 1L * 1pcs,2L* 1pcs |
DW-RE-3000 Rotary Evaporator (3L)
Characteristics
1) DW-RE-3000 water bath rotary evaporator has beautiful design, its structure is reasonable and compact, simple and easy operation, precise temperature control and reliable performance.Besides, strong and durable are also its important advantages.
2) DW-RE-3000 rotary evaporator has two kinds condenser:A type ball milling port condenser and B type standard milling port screw thread condenser. Customer could choose condenser based on actual needs. Temperature range RT-90ºC, when temperature is higher than set temp. Value, heating tube automatic stop heating. This type water bath volume is small, so temperature rising is rapid.
- One time forming 5.5L heating bath use teflon composite material, easy cleaning. Design equiped with vacuum meter and valve, so as to avoid liquid in vacuum pump return flow into evaporation flask, help your research success at one time.
Technical Parameters:
Model |
DW-RE-3000 |
Host |
Rocker plate type buttons , automatic lifting 0-150mm |
Vacuum degree |
< 399.9Pa(3mmHg) |
Evaporation capacity |
Max.25ml/min |
Vacuum display meter |
When vacuum degree reach lowest, close valve and keep display rotary evaporator vacuum degree, reduce laboratory noise, prolong vacuum pump service life. |
Rotation speed |
Digital display / speed stepless adjustment 0-200 rpm/min;Power 40W |
Heating bath |
One time forming teflon composite heating bath φ26×15cm whole closed heating device, Power1.5KW |
Temperature |
Automatic control temperature, digital display, water bath, RT-90ºC±1ºC. |
Condenser |
Vertical type, ball milling port condenser, cooling area 0.27 square meter |
Material charging |
Valve type material charging tube, connect with PTFE tube and retaining water circle. |
Sealing ring |
Fluororubber + PTEF vacuum seal washer. |
Capacity range |
0.25--3L |
Power |
1.5kw Input voltage~220v/50Hz |
Volume / Weight |
71×46.5×79cm 35kg |
Standard configuration |
S35ball milling port collecting flask 2L * 1pcs; 29# standard port evaporation flask 1L * 1pcs,3L* 1pcs |
DW-RE-5000 Rotary Rvaporator (5L)
Characteristics
1) Beautiful design, structure is reasonable and compact, simple and easy operation, precise temperature control and reliable performance.Besides, strong and durable are also its important advantages.
- Water bath is also could be used as oil bath, temperature range RT-90ºC, when temperature is higher than set temp. Value, heating tube automatic stop heating. This type water bath volume is small, so temperature rising is rapid.
3)One time forming heating bath use teflon composite material, easy cleaning. Design equiped with vacuum meter and valve, so as to avoid liquid in vacuum pump return flow into evaporation flask, help your research success at one time.
Technical Parameters:
Model |
DW-RE-5000 |
Host |
Rocker plate type buttons , automatic lifting 0-150mm |
Vacuum degree |
< 399.9Pa(3mmHg) |
Vacuum display meter |
When vacuum degree reach lowest, close valve and keep display rotary evaporator vacuum degree, reduce laboratory noise, prolong vacuum pump service life. |
Evaporation capacity |
Max.43ml/min |
Rotation speed |
Digital display, rotary knob stepless speed adjustable 0-200 rpm/min;Power 40W |
Heating bath |
One time forming teflon composite heating bath φ29×17cm , whole closed heating device, Power 1.8KW |
Temperature |
Automatic control temperature, digital display, water bath, RT-90ºC±1ºC |
Condenser |
Vertical type, high temperature resistance, excellent quality glass double reflux integration, ball milling mouth, condenser cooling area 0.41 square meter. |
Material charging |
Valve type material charging tube, connect with PTFE tube and retaining water circle. |
Sealing ring |
Fluororubber + PTEF vacuum seal washer. |
Capacity range |
0.25--5L |
Power |
2kw Input voltage~220v/50Hz |
Volume / Weight |
78×69×85CM ; 42kg |
Standard configuration |
S35 ball milling port 3Lcollecting flask 1pcs, 29# standard port evaporation flask 1L * 1pcs ,(flange port)5L* 1pcs |
Company Profile
FAQ